Durafirm Parts List |
|
Fulcrum: |
Please specify what this will attach to |
|
R554 |
Fulcrum Assembly with Stand Box
(for stands without guard rails) |
2,160.00 |
|
R550 |
Fulcrum Assembly
(with holes for
rail supports and long roller) |
2,160.00 |
|
|
|
Main Support: (Does not include Fulcrum Assembly) |
|
1M450 |
Main Support Assembly |
906.00 |
|
3M450 |
Main Support Assembly |
2,950.00 |
|
|
|
Ladder: |
C200
|
Step (each)
(Tallest One Meter has 3 steps) |
78.00 |
C211
|
New Step (each)
(Tallest One Meter has 3 steps) |
78.00 |
|
C211-1 |
Step Inserts |
30.00 |
|
|
|
Stands, Shims, Board Channels, and Rubber Pieces: |
|
MP107 |
Shim set-Round:
Plastic-4 each of 3 thickness & 6 Phenolic |
27.00
|
|
MP108 |
Shim Set square:
Plastic 43 each of 7 thickness |
34.00 |
|
MP110 |
Rubber Channel Set-6"
with glue and instructions |
26.50 |
|
MP112 |
Rubber Channel Set-30"
with glue and instructions |
79.50 |
|
MP115 |
Complete Glue Kit with adapter (for channels) |
19.50 |
|
PM108-L |
Corner Piece-left (plugs board tip
after 1975) |
3.50 |
|
PM1108-R |
Corner Piece-right (plugs board
tip after 1975) |
3.50 |
|
PM112 |
Rubber Grommet-plug tips center
(pre 1975 board has 3, after 1975 has 1) |
3.50 |
|
|
|
Hinge Parts and Anchor Fitting Parts: |
|
C202 |
Hinge with aluminum bolts (price
each) |
80.00 |
|
C202A |
Hinge (male) |
30.00 |
|
C202B |
Hinge (female) |
38.00 |
|
C203 |
Hinge Pin |
9.00 |
|
C209 |
Nyliner |
2.25 |
|
C210 |
O-ring |
2.25 |
|
C201-1 |
1M or 3M Anchor Fittings (excludes
hinges) |
195.00 |
|
C250 |
1M or 3M Anchor Fitting (includes
hinges) |
352.00 |
|
SB501-E |
Short Stand Anchor Fitting
(excludes hinges or rail brackets) |
464.00 |
|
SB550-E |
Short Stand Anchor Fitting
Assembly
Including Hinges |
621.00 |
|
|
|
Fulcrum Parts List: |
|
515 |
Rubber Bumper |
4.50 |
|
516 |
Anti-Rattle Clamp |
7.00 |
|
517 |
Roller Block w/(1) 518, (1) 521,
(1) 524, (1) 515, (1) 516, (2) 526, (1) 528, (1) SF111, (2)
533, (2) SF 152 |
78.00 |
|
518 |
Slide Bearing |
5.00 |
|
521 |
Roller Clamp |
9.00 |
|
522 |
Tie Plate with (4) 526 |
39.50 |
|
524 |
Roller Bearing
|
7.25 |
|
530 |
Zerk Fitting (grease gun fitting
on roller block) |
2.75 |
|
532 |
Expansion Pin (lock foot wheel to
roller) |
2.25 |
|
R510S |
Foot Wheel-sold only attached to
short roller |
249.00 |
|
R510L |
Foot Wheel - sold only
attached to long roller |
269.00 |
|
C208A |
Track 1 1/4" wide, one each with 5
bolts |
56.00 |
|
FP500 |
Fulcrum Parts Kit includes: |
488.00 |
|
|
Foot wheel
and roller (specify long or short), tie plate, 2 roller block
assemblies, grease gun and grease.
*Before ordering replacement roller, measure length of roller to be
replaced. |
|
|
|
Board Bolts (carriage bolts for bolting diving board to dive
stand): |
|
SF122 |
5/8" x 3 1/2" Bronze Board Bolt
with nut
(bolts to Durafirm hinges) |
15.75 |
|
SF135 |
5/8" Bronze Nut (only) |
3.00 |
|
SF137 |
5/8" Bronze Nut (only) |
3.00 |
|
SF141 |
5/8" x 5 1/2" Zinc Plated Steel
Bolt with nut |
6.50 |
|
SF142 |
5/8" x 7" Zinc Plated Steel Bolt
with nut |
6.50 |
|
SF143 |
5/8" x 8" Zinc Plated Steel Bolt
with nut |
6.50 |
|
|
|
Stand Bolts (Bolts stand to deck anchors, nuts not required): |
|
SF124 |
5/8" x 1 3/4" Bronze Hex Head Bolt |
6.00 |
|
SF125 |
5/8" x 2" Bronze Hex Head Bolt |
6.00 |
|
SF127 |
5/8" x 2 1/2" Bronze Hex Head Bolt |
6.00 |
|
SF128 |
5/8" x 2 3/4" Bronze Hex Head Bolt |
6.00 |
|
SF129 |
5/8" x 3" Bronze Hex Head Bolt |
6.00 |
|
SF130 |
5/8" x 3 1/4" Bronze Hex Head Bolt |
6.00 |
|
SF132 |
5/8" x 4 1/4" Bronze Hex Head Bolt |
6.00 |
|
SF138 |
5/8" x Brass Washer
(order 1 per installation bolt) |
2.25 |
|
SF139 |
1/4" x Brass Washer
(order 1 ladder installation bolt) |
2.25 |
|
|
|
Stand Assembly Bolts:
(heads of these
bolts are painted. It is recommended that you order touch-up
paint to coat nuts and threads after installation): |
|
SF103 |
3/8" x 1" Aluminum Flat Head
Bolt/Nut for bolting Anchor-fitting to ladder. |
2.00 |
|
SF104 |
3/8" x 1 1/4" Aluminum Flat Head
Bolt/Nut for bolting Step to ladder. |
2.00 |
|
SF105 |
3/8" x 1" Aluminum Hex Head
Bolt/Nut for bolting rail supports to fulcrum box and bolting
cross braces to stand and frame. |
2.00 |
|
SF106 |
3/8" x 1 1/2" Aluminum Hex Head
Bolt/Nut for bolting Hinges to anchor fitting. |
2.00 |
|
|
|
Unpainted Bolts: |
|
SF108 |
5/8" x 2 1/2" Aluminum Hex Head
Bolt/Nut
and 2 washers for bolting fulcrum box
to main support. |
4.50 |
|
|
|
Aluminum Nuts and Washers: |
|
SF111 |
Anti-Rattle Lock Nut
(included in price of #528) |
2.25 |
|
SF152 |
Roller Clamp Lock
(included in price of #533) |
2.25 |
|
|
|
Fulcrum Bolts and Nuts: |
|
526 |
Tie Plate Bolt with nut and washer |
2.25 |
|
528 |
Anti-Rattle Bolt with SF111 nut |
2.75 |
|
529 |
Track Bolt (included in price of
track #208A) |
2.25 |
|
533 |
Roller Clamp Stud with SF152 nut |
2.75 |
